Share

‘On the run’ colour change system cuts production costs for cereals and snacks

‘On the run’ colour change system cuts production costs for cereals and snacks

An innovative colour-change system for packs of assorted extruded cereals and snacks has been developed by Baker Perkins. The ‘Spectrum’ technique extends Baker Perkins’ extrusion capability and cuts production costs. It enables changeover between colour variations of an extruded product to be made ‘on the run’ with minimal waste.

A typical application in the cereals sector is mixed fruit colours in a single packet; in the snacks arena, it could typically be matching the colour of vegetable-flavoured snacks such as carrot, beetroot, tomato, broccoli or peas in a single pack.

This skid-based system spells an end to the inconvenience and cost of cumbersome mixing and storage of different coloured snacks or cereals, with its adverse impact on waste, hygiene and shelf life.

These problems led to a demand for a high-speed colour change system that would allow each colour to be produced in short bursts. The necessary blending of different coloured products can then be accomplished in-line, eliminating the need for off-line storage. Conventionally, colours are injected into the extruder barrel to ensure good mixing but this results in very slow transitions when the colour is changed, leading to considerable waste before a correctly coloured new product emerges.

Introducing the colour at the die should avoid this but differential flow rates between the centre and outer again leads to prolonged transitions. Innovative design by Baker Perkins has minimized this differential, and the transition from one colour to the next is now very swift.

Baker Perkins extrusion systems make an extensive range of snacks and ready-to-eat cereals, from standard direct expanded to high specification added-value products. Modular lines can be expanded at any time to allow a product portfolio to grow.

Click here to read more.

Latest News

Baker Perkins’ patented MAX³ feed system delivers a 40% to 100% increase in powder coating throughput, and combines… twitter.com/i/web/status/1…

17 May 2022

A major investment in manufacturing technology is cutting lead times and adding capacity to bring significant benef… twitter.com/i/web/status/1…

11 May 2022

We're recruiting for engineers across our business, with benefits including permanent contracts, a pre-paid overtim… twitter.com/i/web/status/1…

05 May 2022

Join Ekaterina Krakovskaya and Gerard Nelson at @Ipack_Ima in Milan, Italy next week, where we will be exhibiting o… twitter.com/i/web/status/1…

26 April 2022

The @Schenck_Process Group financial year highlights for 2021 - the first full year since the acquisition of Baker… twitter.com/i/web/status/1…

20 April 2022

Increased power and speed are the key attributes of the new HPX45 #extruder, delivering superior outputs on powder… twitter.com/i/web/status/1…

08 April 2022