Toffee, Caramel & Fudge Making Equipment

Toffee, Caramel & Fudge Making Equipment schematic

1. Autofeed

Weighs and mixes up to 16 dry and liquid confectionery ingredients into a homogeneous slurry. Individual ingredients are fed via a weigh hopper into the mixer and mixed during the fill cycle to produce a consistent slurry. Batches are fed from the Autofeed mixing tank to two reservoir tanks to facilitate a continuous feed to the cooker.

2. Microfilm™ Cooker

Cooking to final moisture takes place in the Microfilm™ cooker. This comprises a scrape pre-heater and a swept surface Microfilm™ rotor, which creates a thin film of syrup that cooks rapidly without process inversion or burning of dairy ingredients.

3. Carablend™ Toffee Cooker

The Carablend™ cooks and caramelizes the syrup and applies pressure to achieve the correct final moisture content.

4. Fondant Addition (optional)

For the creation of fudge products.

5. ServoForm™ Soft Confectionery

Syrup is deposited at final moisture into silicone or metal moulds, then cooled.

  • Toffee, Caramel & Fudge

    High quality, high efficiency and high output, plus greater product variety, are the main reasons for choosing Baker Perkins’ integrated toffee, caramel and fudge making equipment over traditional processes.

    High quality is achieved by a cooking system that develops the right texture and flavour followed by continuous depositing into silicone or metal moulds at final moisture. This creates confectionery pieces that are consistent in shape and weight, with a smooth surface finish: no air bubbles and minimal distortion. The cooking system cooks and caramelizes the syrup in separate processes, giving completely independent control over colour, flavour, moisture and texture

    Efficiency comes from continuous production in a system integrated from ingredient feeding to cooled product. Low scrap rates, minimal labour requirements and negligible downtime keep unit costs extremely low, and the consistent size, shape and weight contribute to high levels of wrapping efficiency. Perfectly regimented discharge for chocolate enrobing is another significant benefit.

    Baker Perkins’ toffee cooking and depositing systems may be specified to produce the full range of traditional toffees and caramels with recipes ranging from budget to premium. The systems also extend process capability to a range of products that cannot be made by any other method. White toffee can be coloured and flavoured, as well as striped and swirled. Traditional brown toffee may be enhanced with chocolate, nuts, or jam centre-fills in a perfectly-shaped outer. Outputs can reach 1.3 tonnes/hour – 3,600 pieces per minute.

  • Required Equipment
    Weighing & Mixing  






    Batch Dissolver







    Microfilm™ Cooker

    Carablend™ Toffee Cooker







    Soft Confectionery


Brochure: Confectionery

Brochure: Confectionery

Toffee, Caramel & Fudge Products

Toffee, Caramel & Fudge Products

View some of the toffee, caramel and fudge products that can be made on Baker Perkins' process lines.

Confectionery Innovation Centre

Confectionery Innovation Centre

Baker Perkins offers all its customers facilities to develop new products and processes, produce samples for test marketing, and conduct feasibility trials.